The Process to Drum Kit Set Up (Full Instruction)

Let’s face it! Today you are going to read complete our Learn The Process to Drum Kit Set Up – Compete Guide For Beginners [2021 Edition]. Did you know, there are various types of drums in a drum set. So, people often get confused about the steps of drum kit set up. So, are you going through the same problem? Don’t get it to your head too much because I’m here to solve the problem for you with this article!

Normally, the experienced players or the drummers who play for a long time can easily understand that how they should organize the drum kit set up. Frankly speaking, the setting up has a direct impact on how you play and what you can accomplish. So, they set it up in a way that’d increase the accuracy and also the comfort while playing the drums.

However, especially if you’re a beginner, mastering how the drum kit set up may be as tough as performing. For this reason, in music institutes, drum teachers focus on teaching the fine points of drumming, from advanced drum skills to good drum set posture, so you can play better, avoid injuries, and sound best.

Parts of Drum Kit

Even though there are many pieces of a drum kit set up, but you can organize the total drum kit into 3 main parts. It gets easier, wait till the end!

Determine The Three Main Parts of Your Drum Kit

Drums, hardware, and cymbals are the three major components of most basic drum kits.

• The drums:  Most drum sets include a bass (or kick) drum, a snare drum, and toms.
• The Hardware:  The bass drum pedal, throne, and hi-hat, and cymbal stands are all examples of common drum gear.
• The Cymbals: Cymbals are a type of percussion instrument. Crash, ride, and hi-hat cymbals are examples of different types of cymbals.

Drum Kit Set Up: Steps

So, now that you know the different parts of the kit, you are ready to know the steps for drum kit set up.

INSTALLING A DRUM SET

Setting up a drum kit, the number of parts you have to work with will tell how to organize the drums. Most beginners start with a 4-piece, or 5-piece drum set. The thing with drums is, there is no limitation. You can add extra components to your drum kit set up as your abilities grow.

GET YOUR BASS DRUM SET UP

Install the bass or kick drum at the center of the drum set. Take a note that the bass drum’s legs are movable. These are to secure the bass drum to the floor so that it does not move as you play.

So, it is essential to adjust the legs so that they are equal on both sides. However, mismatched legs will cause your drum set to wobble during the performance. So, pay attention to that. Next, verify the tips of the bass drum’s legs to ensure they dig into the floor and keep the drum from slipping around.

CHANGE THE PEDAL ON YOUR BASS DRUM

When initially set up your drum set, pay attention to the bass pedal. Normally, the bass drum pedal is hooked to the hoop of your bass drum. So, when you step on the pedal, the beater should strike the bass drum head in the center of the drum and bounce back.

When stepping on the pedal is too difficult or causes legs to exhaust, then you should modify the mechanism or tension of the bass pedal to make it less tight. If the pedal remains on the drumhead without bouncing back, the tension is too slack. So, set up your pedal properly so it wouldn’t generate any problems for you when you play it.

Like, how can it create problems for you? Think of it this way. If the tension becomes too slack, it needs to tighten it so that the drumhead springs back. Most pedals feature a knob or screw that you can turn to adjust the tension, however, this may vary depending on the model.

1. SET UP YOUR SNARE DRUM

You’ll need to modify the height of the snare drum as you set up your drum equipment. The height of your snare drum should be a few inches above your thigh, allowing you to effortlessly hit the drum with any hand without striking the rim.

Set up the drum such that the snare throw-off, or the lever that activates the snare, is on the left side. Most drummers set up their snares flat, however traditional musicians may put their drums slightly down and away. 

2. CONFIGURETOMS

There are two types of toms in most drum sets: floor toms and mounted toms. Floor toms should set at around the same height as the snare drum, whereas mounted toms (or toms) should fix up at a little inclination towards you.

To make it simpler to play, position your toms differently. For drum setups with more than one mounted tom, position your toms a few inches apart and at equal angles. If hitting the floor tom seems awkward, consider angling the tom slightly toward you. It might be easy to angle toms than flattening them, however, this will depend on the height of the drum’s throne. 

Also, don’t forget to check my reviews article Alesis Nitro Mesh Electronic Drum Kit – Full Reviews and Buying Guide in The Jun 2021 and Mendini Kids Drum Set – Unlimited Reviews and Buying Guide For Kids on 2021 and How to Setup a Drum Set in Simple Ways and Acoustic Vs. Electric Drums Set : What’s Right For You please read the.

3. SET UP THE DRUM THRONE

We need to sit on the drum throne to play. Place the drum throne in a location where you can access all of the components of your drum set for improved gameplay. This will start playing with the least amount of effort and will help you avoid damage. 

4. SET UP THE HI-HAT

When you’re sitting at the drum kit, place the hi-hat just to the left of the snare. Now hi-hat cymbals are attached to the rod of your stand through a clutch that connects the top cymbal to the rod. You can use this to easily open and close the hi-hats. Make sure the pedal for your hi-hat is in a place where the foot can comfortably reach it.

It is critical that hi-hat cymbals sit higher than your snare drum. Setting your hi-hats at the same height as your snare, or lower, may make them more difficult to strike. 

5. SET UP CRASH AND RIDE CYMBALS.

Most drummers employ one or two crash cymbals and one ride cymbal. The ride cymbal should position up to the right, generally slightly over the floor tom.

If you just have one crash cymbal, place it to the left of your kit, between the snare drum and mounted tom.

When utilizing a second crash cymbal, we should put it between your mounted tom and floor tom. Make sure that both crash cymbals are a few inches above the mounted toms, but not too much above. And we want to keep them within easy reach. 

HOW TO SIT IN THE RIGHT DRUM SET POSTURE

Now that you’ve got your drum setup set up, let’s speak about drumming stance. Maintaining an appropriate drum set posture is essential because it allows you to perform more effectively, improves your sound, and reduces your chance of injury.

Conclusion

In the above discussion, we can see how to set up the drum kit with all details. Every important detail in the above discussion. One can easily learn and do their own drum kit set up. Hopefully, this will be helpful to every beginner to do their own set up. This article is in a very simple language so that everyone can easily understand the set up.